Troubleshooting a Hot Water System Emergency: What to Do If It Stops Working
Further DetailsDo you find yourself trying to locate insight around What Would Cause My Electric Water Heater to Stop Working??
Many modern homes utilize an electric hot water heater for their heating unit, because of its ease as well as simplicity of use. However, similar to any other electric home appliances, troubles may occur with its use, all of a sudden. It can be actually discouraging to awaken to a cool shower rather than a warm one or having your bathroom with water that isn't warm sufficient and even as well warm. Whatever the case might be, hot water heater troubles can be quite aggravating. Luckily, we have actually made a listing of feasible services to your water heater issues. There are a variety of variables that could trigger a lot of these troubles, it could be a concern with the power supply, the electrical heating element, or the thermostat. Prior to doing anything, ensure you shut off the primary power supply for security. Whatever the trouble is, getting it dealt with ought to not present too much of an issue if you adhere to these actions:
Check Your Power Supply:
As basic as this might appear, it is extremely needed. Without ample power, your hot water heater will not work. So the first thing to do when your water unexpectedly retires is to confirm that it isn't a power issue. Examine if the fuse is blown out or the circuit breaker tripped. If the breaker is the concern, simply transform it off and on again. Replace any damaged or damaged fuse. Check the appliance with power after these adjustments to see if it's now working.
Examine the Heating Element in the Water Heater:
If it's not a power issue, after that try having a look at your burner if it is still working. Examine each of your heating elements to ensure the trouble isn't with any of them. If any one of them is defective, change that component and then inspect whether the warm water is back on.
Inspect Your Thermostat:
If your water heater still isn't functioning or the water appearing isn't hot enough, you may need to inspect the temperature level setups on your upper thermostat. Make sure the breaker is turned off prior to doing anything. Open the accessibility panel as well as press the red switch for temperature level reset above the thermostat. This ought to help heat the water. Transform the circuit breaker back on and inspect if the trouble has been solved.
Call A Professional:
If after changing all damaged parts and also resetting your temperature level, the hot water heater still isn't working, you may require to get in touch with a professional plumber for a specialist opinion. The problem with your heating system could be that the hot and cold faucets have actually been switched or it may be undersized for the amount of hot water needed in your house. Whatever the case may be, a specialist plumber would certainly help resolve the issue.
Verdict
Water heater issues are not constantly significant. Many of them are because of small issues like a blown fuse or damaged heating element. Replacing the damaged components must work. However, if you are still unable to address the issue, give a call to your closest plumber to come to get it fixed.
Common Reasons Why Your Hot Water Heater Isn’t Working
Water Gets Too Hot
Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.
FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.
Water Doesn’t Get Hot
This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).
FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.
Leaking Water Heater
A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.
FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.
Noisy Water Heater
Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.
FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.
Pilot Light Keeps Going Out
Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.
FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.
Water Smells Bad
The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.
FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.
Water Looks Brown Or Rusted
The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)
FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.
https://www.huskyair.com/blog/hot-water-heater-isnt-working/
Hopefully you liked our excerpt about Hot Water Heater Repair. Thank you so much for taking time to read through our piece. Liked our blog entry? Please share it. Help others discover it. I cherish reading our article about How to Troubleshoot and Repair an Electric Water Heater.
Contact for excellence!